Clean Finish Electrical · Pool and outdoor
Pool, spa, and outdoor electrical in Orange County
Anything electrical near a pool or spa has to be done right, and you want it done by someone who treats water as the hazard it is.
Texting is fastest. Brian usually answers within the hour during the day.
What it usually involves
Pool pump and heater circuits are the backbone of the job: sized correctly for the equipment, protected the way code requires, and run so a future service call does not turn into a treasure hunt through conduit. Brian wires new equipment pads and replaces failing circuits on existing ones, matching whatever pump or heater you have or are upgrading to. On older equipment pads he also checks whether the disconnect and the wiring feeding it have kept up with the equipment, since a pad that has been added to over the years often has not.
Pool and spa lights get their own attention, since a light fixture that lives underwater has zero margin for a bad connection. That means the right fixture, the right niche wiring, and GFCI protection that is actually working, not just present. Brian tests the actual trip point on pool and spa light circuits rather than assuming a GFCI outlet upstream is doing its job.
GFCI protection and bonding around water are not optional extras, they are the core of what keeps a pool area safe. Bonding ties together the pool structure, the equipment, the ladder, and anything metal nearby so nothing can become energized relative to anything else. Brian checks and corrects bonding on both new work and older pools where it was done incompletely the first time, which is common on pools built before current bonding requirements existed.
A lot of pools now run on automation panels that control pumps, heaters, lights, and features from an app or a wall panel. Brian installs and wires these panels and troubleshoots them when a feature stops responding, whether the fault is electrical, in the panel's wiring, or in the automation panel itself losing communication with the equipment it controls.
Outside the pool equipment pad, this service covers the rest of the yard: patio and pergola circuits, landscape lighting, and outdoor kitchens with the outlets and circuits a real outdoor kitchen needs. Every box and connection outside gets a weatherproof cover that stays weatherproof, not one that looks fine on install day and fails after the first real rain, and every outdoor circuit gets the GFCI protection it is required to have.
Permits and inspection
Anything near water is inspected for good reason. Pool equipment circuits and bonding need a permit in every Orange County city. Brian handles it.
What it usually costs
Call or text for a quote. Every house is different.
Every house is different. Text a photo and Brian will give you a real number before he shows up.
Questions people ask about pool and outdoor electrical
My pool pump trips the breaker.
That can be the motor itself, a failing GFCI, or a connection that has gotten wet. Brian diagnoses which one it is before replacing anything, since swapping the breaker or the pump without knowing the cause often does not fix it.
Can you work with my pool service?
Yes. Several pool service companies in the area refer their electrical work to Brian, and he is used to coordinating around a pool tech's schedule and their diagnosis.
Is my old pool light safe?
If it is not on GFCI protection, no, and that is worth fixing regardless of anything else going on with the light. Brian can check the circuit and correct it without necessarily replacing the fixture.
What does it cost?
Every house is different, so Brian does not publish prices. Text a photo of what you have and he will give you a real number before he shows up.
Request a quote
Tell Brian what is going on.
Fastest: text a photo to (949) 357-6448. The form below works too, but allow 24 to 48 hours for a reply.
Texting is fastest. Brian usually answers within the hour during the day.